Tripp Lite WWSS1327CP WorkWise Height-Adjustable Sit-Stand Workstation, Single-Monitor, Clamp-on

£305.42 (£254.52 + VAT)

Tripp Lite WWSS1327CP WorkWise Height-Adjustable Sit-Stand Workstation, Single-Monitor, Clamp-on. Product colour: Black, Minimum notebook screen size compatibility: 33 cm (13"), Maximum notebook screen size compatibility: 68.6 cm (27"). Swivel angle: 180°, Tilt angle range: -13 – 45°, Angle of rotation: 360°. Width: 599.4 mm, Depth: 1257.3 mm, Height: 856 mm. Package width: 414 mm, Package depth: 774.7 mm, Package height: 180.3 mm. Master (outer) case width: 426.7 mm, Master (outer) case length: 795 mm, Master (outer) case height: 200.7 mm

This product has now been discontinued

Category:

More Information

Product Information

Tripp Lite’s WWSS1327CP WorkWise™ Standing Desk-Clamp Workstation allows you to enjoy the benefits of standing for a portion of the day without using your entire work surface. Simply clamp the WWSS1327CP to the edge of a fixed-height desk or table from 1 to 3.35 inches thick. With a single touch, you can change the height of the workstation to improve ergonomics, promote health and increase productivity.

Press the lever to raise or lower the pneumatic arm. All sections move together for smooth transitions between sitting and standing. Increase tension for heavier loads or decrease it for lighter items. The arm adjusts up/down 3 inches, swivels 150° and can rotate 360° to swing the workstation out of the way when not in use (swing range is 49.8 inches from front to back). Built-in cable management reduces cable clutter. Maximum weight capacity is 29 pounds.

Single-arm mount holds up to a 27-inch flat-panel display (VESA 75×75 or 100×100 mounting patterns). Display can be rotated for horizontal or vertical viewing.

Middle platform is 23.6 x 9.9 inches and keeps accessories or a small laptop within reach. At its lowest height, the platform is 1.2 inches above the work surface. It adjusts up to 20.9 inches above the work surface.

Keyboard tray is 23.6 x 10.6 inches to hold the largest, most popular models. At its lowest height, the tray is 2.5 inches below the work surface. It adjusts up to 14.5 inches above the work surface. The wrist rest is removable. Plugs are included to fill exposed mounting holes.

One-Touch Height Adjustment for Sit-Stand Ergonomics
Lever raises or lowers pneumatic arm for smooth height adjustment
Lever attaches to left or right side of keyboard tray
Sections move together for seamless sit-stand transitions
Use included hex key to increase or decrease tension according to load
Maximum weight capacity is 29 lb.

Clamp Mount Requires Minimal Desk Space
Clamps to a flat fixed-height work surface from 1 to 3.35 in. thick
Provides stability at all workstation heights

Pneumatic Swing Arm
Adjusts up/down 3 in. on pole
Offers 150° swivel and 360° rotation
Swing range is 49.8 in. from back of workstation to end of keyboard
Integrated cable management reduces cable clutter

Single-Arm Monitor Mount
Accommodates a 13 to 27 in. flat-panel display
Compatible with VESA 75×75 and 100×100 mounting hole patterns
Vertical adjustment and -13° to +45° tilt
Display can be rotated for horizontal or vertical viewing

Middle Platform
23.6 x 9.9 in. platform
Keeps accessories or a small laptop within reach

Keyboard Tray
Extra-large 23.6 x 10.6 in. tray holds the largest, most popular models
Keyboard tray adjusts up to 14.5 in. above the work surface
Removable wrist rest mounts to the left or right
Mounting hole plugs included * Lever provides smooth one-touch height adjustment
* Swing arm provides left/right swivel adjustment
* Single-arm mount for a 13 to 27 in. flat-panel display
* Max. height of keyboard tray is 14.5 in. above work surface
* Maximum weight capacity is 29 lb.

Spec

Specification

Brand

MPN

WWSS1327CP

Ratings

Reviews

There are no reviews yet.

Be the first to review “Tripp Lite WWSS1327CP WorkWise Height-Adjustable Sit-Stand Workstation, Single-Monitor, Clamp-on”