Kingston 8GB, DDR4, 2666MHz (PC4-21300), CL19, DIMM Memory

£33.80 (£28.17 + VAT)

Out of stock

Email when stock available

SKU: KVR26N19S8/8 Category:

Product Information

ValueRAM's KVR26N19S8/8 is a 1G x 64-bit (8GB) DDR4-2666 CL19 SDRAM (Synchronous DRAM), 1Rx8, memory module, based on eight 1G x 8-bit FBGA
components. The SPD is programmed to JEDEC standard latency DDR4-2666 timing of 19-19-19 at 1.2V. Each 288-pin DIMM uses gold contact fingers.

Features
  • Power Supply: VDD=1.2V Typical
  • VDDQ = 1.2V Typical
  • VPP – 2.5V Typical
  • VDDSPD=2.2V to 3.6V
  • Nominal and dynamic on-die termination (ODT) for data, strobe, and mask signals
  • Low-power auto self refresh (LPASR)
  • Data bus inversion (DBI) for data bus
  • On-die VREFDQ generation and calibration
  • Single-rank
  • On-board I2 serial presence-detect (SPD) EEPROM
  • 16 internal banks; 4 groups of 4 banks each
  • Fixed burst chop (BC) of 4 and burst length (BL) of 8 via the mode register set (MRS)
  • Selectable BC4 or BL8 on-the-fly (OTF)
  • Fly-by topology
  • Terminated control command and address bus
  • PCB: Height 1.23” (31.25mm)
  • RoHS Compliant and Halogen-Free

Specification

Brand

KINGSTON

Model

KVR26N19S8/8

Memory Model

Kingston ValueRAM

Memory Type

DDR4

Memory Size

1 x 8GB

Compliance

PC4-21300

Pins

288-pin

CAS Latency

CL19

Data Integrity Check

Non-ECC

Voltage

1.2V Typical

Timings

19-19-19

Warranty

Lifetime

Series

Kingston ValueRAM