Tenda O4 wireless access point 300 Mbit/s White Power over Ethernet (PoE)

£51.68 (£43.07 + VAT)

Tenda O4. Maximum data transfer rate: 300 Mbit/s, Ethernet LAN data rates: 10,100 Mbit/s, Frequency band: 5 GHz. Security algorithms: 64-bit WEP,128-bit WEP,WPA,WPA-PSK,WPA2,WPA2-PSK. Input voltage: 24 V, Input current: 0.5 A, Power consumption (typical): 8.5 W. Placement: Pole, Wall, Product colour: White, International Protection (IP) code: IP64. Antenna type: Internal, Antenna gain level (max): 14 dBi

Out of stock

Email when stock available

SKU: O4 Category:

Product Information

5GHz 14dBi 5Km Outdoor Point To Point CPE
Tenda O4, animata dalla CPU Qualcomm AR9344, è progettata per soluzioni CPE WISP e soluzioni di rete wireless a lunga distanza per la videosorveglianza e la trasmissione dei dati. Funzionante su banda a 5 GHz per una velocità massima fino a 300 Mbps, è dotata di un’antenna direzionale da 14dBi per fornire, captare e mantenere un segnale stabile per una rete wireless fino a 5 Km di distanza (supportate le modalità operative AP/Station/WISP/P2MP/WDS Repeater/Router). Grazie alla tecnologia di auto-bridging, due CPE O4 possono connettersi automaticamente tra loro per semplificare la configurazione. Inoltre, la certificazione IP64 e la protezione da fulimini fino a 6000V, la rendono idonea ad un utilizzo all’aperto. Supportato il protocollo proprietario TD-MAX (Tenda TDMA Time Division Multiple Access) per migliorare le performance e la capacità per scenari wireless WISP.

5km Point to Point Outdoor CPE
O4 5GHz Long Range Outdoor CPE is designed to WISP CPE solutions and long distance wireless network solutions for video surveillance and data transmission. It features with 14dBi directional antenna to provide an efficient way to pick up and maintain a stable signal for a wireless network. Adopt of auto-bridging technology,two CPE can connect to each other automatically to make it easy to setup.

5km+ transmission Range
O4 adopts of independent power amplifier and 14dBi directional antenna to provide an efficient way to pick up and maintain a stable signal for a wireless network up to 5km.

Super channel-Extended Frequency
O4 adopt of Qualcomm AR9344 chipset and special software mechanism optimization for radio driven architecture to offer extended frequency support. This feature is designed to help users get out of the congested, unlicensed 5GHz band and into clean spectrum.

TD-MAX-TendaTDMA proprietary protocol
TD-MAX is Tenda TDMA (Time Division Multiple Access) proprietary protocol to improve performance and capacity for wireless WISP outdoor application scenarios.
In outdoor enviroment, the CPE use highly directional antennas to connect to the Basestation from distances that can span several kilometers. the CPE can’t sense each other, they become “hidden nodes” and cannot coordinate access to the wireless channel. Thus the Basestation experiences frequent collisions from stations transmitting simultaneously. As the network scales, these collisions build up exponentially, increasing latency and lowering throughput. With TD-MAX, it coordinate all the data transmission and allocates time to active clients to provide greater noise immunity performance when compared to the conventional 802.11 CSMA/CA (Carrier Sense Multiple Access / Collision Avoidance) protocol.

10/20/30/40MHz Channel Bandwidth for better throughput
O4 apply special optimization in software for register parameter to deliver 10/20/30/40MHz channel bandwidth option. It provides extra 10MHz and 30MHz channel bandwidth option to consumize according to applycation scenarios.
When you choose 30MHz channel bandwidth option, it can increase throughput for noisy environments. When you choose 10MHz channel bandwidth option, it can increase the number of available, non-overlapping channels, so networks can scale better.

Channel shift to avoid interferrence
O4 provide Channel Shift feature to offset the central frequency 5MHz upper. It can avoid interference from nearby AP and deliver higher throughput.

Multiple Application Scenarios
Long-Distance Wireless Connection
One work as AP mode and another work as Station mode to create a long distance wrieless connecton for video surveillance and data transmission.

WISP(Client+Router) Mode
Wirelessly connect to WISP station/hotspot to share Internet to local wireless and wired network.

CPE Assistant-Centralized Management Platform
O4 equipped with centralized management software that helps users easily manage all the devices in their network from a single PC – CPE Assistant. Functions like device discovery, status monitoring, firmware upgrading, and network maintenance can be managed using CPE Assistant.

Professional Outdoor Design
O4 adopt of IP64 weatherproof and 6000V Lightning protection design, It can withstand the harsh environmental conditions such as sunshine, rainfall or extremely low/high temperature environment









There are no reviews yet.

Be the first to review “Tenda O4 wireless access point 300 Mbit/s White Power over Ethernet (PoE)”