Netgear GS728TP Managed L3 Gigabit Ethernet (10/100/1000) Power over Ethernet (PoE) Grey

£362.54 (£302.12 + VAT)

Netgear GS728TP. Switch type: Managed, Switch layer: L3. Basic switching RJ-45 Ethernet ports type: Gigabit Ethernet (10/100/1000), Basic switching RJ-45 Ethernet ports quantity: 24. Full duplex. MAC address table: 8000 entries, Switching capacity: 1 Gbit/s. Networking standards: IEEE 802.1D,IEEE 802.1Q,IEEE 802.1s,IEEE 802.1w,IEEE 802.1x,IEEE 802.3ad,IEEE 802.3af,IEEE 802.3x. Power over Ethernet (PoE). Rack mounting

Out of stock

Email when stock available



SKU: GS728TP-100EUS Category:

Product Information

The NETGEAR new generation of Gigabit PoE/PoE+ Smart Switches offers powerful L2 and L2+ features, better PoE functions, and enhanced performance and usability. They are purposely designed for the converged networks where voice, video, data are all carried on a single network platform for network eff ciency, operational cost savings, and ease of management.

There are three products in this series: a 28-port Gigabit with PoE, a 28-port Giabit with PoE Plus, and a 52-port Gigabit with PoE. All switches come with 4 dedicated Gigabit SFP ports for fi ber connectivity. The new generation of Gigabit PoE/PoE+ Smart Switch from NETGEAR is the optimized solution providing the best value at an aff ordable SMB price point.

Designed for Converged Network, Big or Small
– Gigabit Speed with all ports capable of support either POE or PoE+
– Auto Voice VLAN for fast and reliable deployment of VoIP
– Auto Video VLAN, following the same concept of Auto Voice, help speed up your deployment of IP-based surveilliance system
– Static routing, helps to route internal traffic for more efficient use of network resources
– IGMP and MLD snooping, providing advanced multicast filtering

Network Development Made Easy
– Auto Voice VLAN for easy development of VoIP
– Auto Video for simple deployment of IP Surveillaince
– ACL Wizard for a guided tour to set up your network access control
– Smart Control Center, a powerful tool for multi-switch discovery, deployment, monitoring and firmware upgrade
– PoE Timer for scheduling on/off time of your PoE powered devices.

Smart IT, not Big IT
– Easy to manage via web-Based Management GUI or Smart Control Center for multi-switch deployment
– Standard-based technology, ensuring interoperability with any standard-based devices in the existing network
– Dual firmware images, improving reliability and uptime to your network
– Worry-free with NETGEAR ProSAFE Lifetime Hardware Warranty
– Assist with customer deployment with 1-year Free 24×7 Advanced Technical Support * Solid performance with a non-blocking architecture, 8K MAC address table, 256 VLANs, 480 shared ACL entries, 32static routes, and 1,024 Multicast Groups
* Comprehensive IPv6 management, QoS and ACL, ensuring investment protection and a smooth migration to IPv6-based networking
* PoE+ support on all PoE models with the GS728TPP providing PoE+ support on all ports, adding the flexibility to add power-hungry devices such as video phone, PTZ camera and 11ac Wireless APs into the network in the future
* The presence of SFP ports provide necessary fiber uplinks, while dedicated SFP ports on many models further builds uplink redundancy and failover, improving reliability and availability for network virtualization
* Energy Efficient Ethernet (IEEE 802.3az) support for more energy savings in the future when more EEE-compliant end devices come to market
* Advanced QoS with IPv4/IPv6 ingress traffic filtering (ACLs) and prioritization (QoS – Diff Serv)
* Dynamic VLAN assignment for easy user authentication and location-independent access to network

Specification

Full duplex

Y

MAC address table

8000 entries

Firmware upgradeable

Y

Storage relative humidity (H-H)

0 – 95%

LED indicators

Y

Operating altitude

0 – 3000 m

Heat dissipation

901.2 BTU/h

IGMP snooping

Y

Number of multicast groups filtered

1024

User guide

Y

MAC address filtering

Y

Mean time between failures (MTBF)

345901 h

Power LED

Y

Switching capacity

1 Gbit/s

Rack mounting

Y

Jumbo frames support

Y

Rate limiting

Y

Power over Ethernet (PoE) ports quantity

24

Total Power over Ethernet (PoE) budget

15.4 W

Power over Ethernet (PoE)

Y

Electromagnetic compatibility

CE, FCC, Class A EN 55022, Class A C-Tick, EN 50082-1, EN 55024, CCC

Cables included

AC

Access Control List (ACL)

Y

Storage temperature (T-T)

-20 – 70 °C

Operating temperature (T-T)

0 – 55 °C

Operating relative humidity (H-H)

10 – 90%

Number of VLANs

256

Management protocols

IGMP, SNMP v1/v2/v3, RMON 1/2/3/9, SSL/HTTPS & TLS v1.0

Copper ethernet cabling technology

1000BASE-T,100BASE-T,10BASE-T

Broadcast storm control

Y

Switch type

Managed

Fiber ethernet cabling technology

1000BASE‑LX,1000BASE‑SX

SFP module slots quantity

4

Supported network protocols

IPv4, IPv6, TFTP, SNTP, TACACS+

DHCP features

DHCP client

Port mirroring

Y

Power over Ethernet plus (PoE+) ports quantity

8

Quality of Service (QoS) support

Y

Static port security

Y

Basic switching RJ-45 Ethernet ports quantity

24

Product colour

Grey

Brand

Netgear

Switch layer

L3

Fiber optic connector

SX

Power consumption (typical)

192 W

Noise level

31.8 dB

Spanning tree protocol

Y

Packet buffer memory

8 MB

Number of static routes

32

Web-based management

Y

Basic switching RJ-45 Ethernet ports type

Gigabit Ethernet (10/100/1000)

Multicast support

Y

Networking standards

IEEE 802.1D,IEEE 802.1Q,IEEE 802.1s,IEEE 802.1w,IEEE 802.1x,IEEE 802.3ad,IEEE 802.3af,IEEE 802.3x

VLAN support

Y

Model

GS728TP-100EUS

Reviews

There are no reviews yet.

Be the first to review “Netgear GS728TP Managed L3 Gigabit Ethernet (10/100/1000) Power over Ethernet (PoE) Grey”